v14 crashes

Get help, report and discuss bugs.
sppedst343
Posts: 9
Joined: 21 Nov 2014, 22:41

Re: v14 crashes

Post by sppedst343 » 02 Dec 2014, 18:23

right, i have this things disabled also. is it better for performance to enable the settings you advised to disable in post 1?

hugbug
Developer & Admin
Posts: 7435
Joined: 09 Sep 2008, 11:58
Location: Germany

Re: v14 crashes

Post by hugbug » 02 Dec 2014, 19:43

sppedst343 wrote:is it better for performance to enable the settings you advised to disable in post 1?
Yes, they must be enabled for best performance. The disabling was a measure to narrow down the issue. If I remember correctly your crashes were occurring during unpack and that bug is fixed in 14.1 (and 15.0-testing as well).

jimboe
Posts: 39
Joined: 08 Jan 2013, 05:50

Re: v14 crashes

Post by jimboe » 03 Dec 2014, 04:44

@craig_t

I run with only 128MB of RAM on a lowly NAS.. I had problems as well with ArticleCache.

I have only limited tests so far with the compiled 14.1 I have, but so far, with ArticleCache=50 , and CrcCheck=yes I haven't crashed- yet.

If and when it does, I have already compiled the debug version so we'll see..

I believe I can still induce a crash rather quickly if I set ArticleCache to 100.

Craig_T
Posts: 26
Joined: 12 Nov 2014, 17:08

Re: v14 crashes

Post by Craig_T » 03 Dec 2014, 20:00

Thanks Jim I will give that a go with it lower on mine, I was using 60 but 50 may work!

sppedst343
Posts: 9
Joined: 21 Nov 2014, 22:41

Re: v14 crashes

Post by sppedst343 » 07 Dec 2014, 18:06

hugbug wrote:
sppedst343 wrote:is it better for performance to enable the settings you advised to disable in post 1?
Yes, they must be enabled for best performance. The disabling was a measure to narrow down the issue. If I remember correctly your crashes were occurring during unpack and that bug is fixed in 14.1 (and 15.0-testing as well).
thats right, i had the crash at unpacking. so i enabled quickpar, article cache (100 mb) and directwrite. i had no craches since upgrade to 14.1 thnx

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests