Page 1 of 1

[Solved] Can't access web UI on LAN.

Posted: 30 Aug 2017, 09:49
by Mssol94
I'm having problems with accessing the web UI on LAN. I have set the ControlIP as 0.0.0.0. I've also tried to ping the IP-address with the port number without a response. I can access Sonarr and Radarr on the same computer.

Re: Can't access web UI on LAN.

Posted: 30 Aug 2017, 10:06
by hugbug
Check Firewall on PC where NZBGet runs.

Re: Can't access web UI on LAN.

Posted: 30 Aug 2017, 10:42
by Mssol94
I can't see that theres anything wrong with the firewall settings.

Image

Re: Can't access web UI on LAN.

Posted: 30 Aug 2017, 10:55
by hugbug
Mssol94 wrote:
30 Aug 2017, 09:49
I've also tried to ping the IP-address with the port number
What do you mean? You can't ping a port.

ControlIP and ControlPort are the only options to set in NZBGet.
If NZBGet is accessible from local computer then it has to be a network issue:
  • check if using correct IP and port in browser;
  • check Firewall settings on both computers;
  • maybe your router blocks the port.

Re: Can't access web UI on LAN.

Posted: 30 Aug 2017, 11:15
by Mssol94
Ok, I thought i could ping a port. But i have located the problem. I can access it when i turn off the firewall, so there must be something wrong with the rules. I tried adding a rule that allows inbound connections to NZBGet and i also tried to add a rule that allows inbound connections to the specific port, but it still doesn't work.