Get help, report and discuss bugs.
-
Mssol94
- Posts: 3
- Joined: 30 Aug 2017, 09:40
Post
by Mssol94 » 30 Aug 2017, 09:49
I'm having problems with accessing the web UI on LAN. I have set the ControlIP as 0.0.0.0. I've also tried to ping the IP-address with the port number without a response. I can access Sonarr and Radarr on the same computer.
Last edited by
Mssol94 on 30 Aug 2017, 14:42, edited 1 time in total.
-
hugbug
- Developer & Admin
- Posts: 7645
- Joined: 09 Sep 2008, 11:58
- Location: Germany
Post
by hugbug » 30 Aug 2017, 10:06
Check Firewall on PC where NZBGet runs.
-
Mssol94
- Posts: 3
- Joined: 30 Aug 2017, 09:40
Post
by Mssol94 » 30 Aug 2017, 10:42
I can't see that theres anything wrong with the firewall settings.
-
hugbug
- Developer & Admin
- Posts: 7645
- Joined: 09 Sep 2008, 11:58
- Location: Germany
Post
by hugbug » 30 Aug 2017, 10:55
Mssol94 wrote: ↑30 Aug 2017, 09:49
I've also tried to ping the IP-address with the port number
What do you mean?
You can't ping a port.
ControlIP and ControlPort are the only options to set in NZBGet.
If NZBGet is accessible from local computer then it has to be a network issue:
- check if using correct IP and port in browser;
- check Firewall settings on both computers;
- maybe your router blocks the port.
-
Mssol94
- Posts: 3
- Joined: 30 Aug 2017, 09:40
Post
by Mssol94 » 30 Aug 2017, 11:15
Ok, I thought i could ping a port. But i have located the problem. I can access it when i turn off the firewall, so there must be something wrong with the rules. I tried adding a rule that allows inbound connections to NZBGet and i also tried to add a rule that allows inbound connections to the specific port, but it still doesn't work.
Who is online
Users browsing this forum: No registered users and 47 guests